AISI 4140 steel bar is widely used as tool steel in industrial applications. And we are professional astm 4140 steel alloy supplier, stockist and exporter.
9839 4140 4140 ALLOY Metals Castle Metals SiteAlloy 4140 (AISI 4140) is one of the most popular direct hardening Cr-Mo alloy steel plates that have the ability to develop an extensive range of hardness and strength. Alloying elements and thermal treatments, such as quenching and tempering, greatly influence the hardness and strength of the steel.
AISI 4140 alloy steel can be cold worked using conventional methods in the annealed condition. Annealing. AISI 4140 alloy steel is annealed at 872°C (1600°F) followed by slowly cooling in the furnace. Tempering. AISI 4140 alloy steel can be tempered at 205 to 649°C (400 to 1200°F) depending upon the desired hardness level.
AISI 4140 Alloy Steel (UNS G41400) - AZoMAISI 4140 alloy steel can be cold worked using conventional methods in the annealed condition. Annealing. AISI 4140 alloy steel is annealed at 872°C (1600°F) followed by slowly cooling in the furnace. Tempering. AISI 4140 alloy steel can be tempered at 205 to 649°C (400 to 1200°F) depending upon the desired hardness level.
AISI 4140 Alloy SteelAISI 4140 is a chromium-molybdenum alloy steel. It can be heat treated and hardened and offers impressive toughness, though not enough to be made into stainless steel. Widely used across numerous industries, 4140 stands along as one of the most versatile metals on the market.
Application of AISI alloy round 4140 steel Plates. ASTM alloy 4140 steel bar, flat or plate material can be used for as wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades. Typical applications for 4140 tool steel uses include Components, Adapters, Arbors,strippers, holder blocks, mold
Alloy Steel 4140 - Ameralloy4140 Chromium-Molybdenum Steel. Supplied in the annealed or prehardened condition. 4140 PREHARD is heat treated to a medium hardness (HRC 28/32) and is designated as 4140 HT. 4140 annealed is supplied in the soft condition and can be hardened to RC 40. 4140 HT is supplied in many forms such as hot rolled or turned, ground and polished rounds and DCF plate
Grade Guide:AISI 4140 Steel Metal Supermarkets - Steel Jun 19, 2018 · AISI 4140 steel is a low alloy steel containing chromium, molybdenum, and manganese. It is widely used across numerous industries and is an excellent material choice due to its toughness, high fatigue strength, and abrasion and impact resistance. Not many grades can match the versatility and usefulness of 4140.
AISI 4140 steel is alloyed with chromium and molybdenum, hence the term chromoly steel. The addition of these alloying elements and its relatively high carbon content (around 0.40%) provide this low-alloy steel with excellent strength to weight ratio and make it a lot stronger and harder than standard 1018 and 1020 steels.
Steel Grade AISI 4140 Richmond Steel CanadaSteel Grade AISI 4140 This medium carbon alloy grade is widely used for many general-purpose parts requiring high tensile strength and toughness. 4140 contains chromium and molybdenum as alloying elements and may be heat treated over a wide range to give the combined advantages of proper hardness, strength and ductility.
Steel Sheet, Strip, and Plate, 0.95cr - SAE InternationalSteel Sheet, Strip, and Plate, 0.95cr 0.20mo (0.38 0.43c) (SAE 4140) AMS6395E This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate. These products have been used typically for heat treated parts, 0.875 inch (22.22 mm) and under in section thickness at time of heat treatment, requiring through
Oct 07, 2020 · AISI 4140 is a Cr-Mo-Mn based high strength low alloy steel offering high fatigue strength, toughness, abrasion & impact resistance. Being a medium carbon steel range, AISI 4140 gets hardened during welding repair especially in the heat affected zones (HAZ) due to thermal cycles and microstructural transformation along with locked residual stresses
sae 4140 steel plate - offers 1,719 sae 4140 steel plate products. A wide variety of sae 4140 steel plate options are available to you, such as standard, processing service, and application.4140 Steel Plate Precision Grinding, Inc.General Information on 4140 4140 alloy steel is a low alloy steel that contains chromium, molybdenum, and manganese. Because it contains chromium and molybdenum it is sometimes referred to as Chromoly Steel. 4140 also has high fatigue strength, excellent strength to weight ratio, abrasion and impact resistance, and torsional strength.